Tolerances

Tolerances

Property  
Tolerance, routing +/-0,1 mm
Tolerance, depth routing +/-0,1 mm
Tolerance, V-cut +/-0,2 mm
Min board thickness with V-cut 0,5 mm
Tolerance, hole size, plated +/-0,075 mm
Tolerance, hole size, not plated +/-0,05 mm
Tolerance, hole position +/-0,05 mm
Tolerance, board thickness T<1.0mm:          +/-0,08 mm
1.0≤T<1.6mm:    +/-0,13 mm
T≥1.6mm:          +/-10%
Controlled impedance, tolerance +/-10% ...+/-5% (advanced)
Min. inside radius, routing 0,25 mm

Minimum inside radius (corner) -outline
Minimum inside corner to cut  = A = 0.25mm






Hole diameter - location - laminate thickness tolerances
Tolerance of hole diameter, PTH = C = ±0.075mm
Tolerance of hole location = E = ±0.05mm (between the holes)
(E: location compared to nominal)
Tolerance of laminate thickness, double-singlesided = A = ±10%
Tolerance of laminate thickness, multilayer = D = ±10%